P1H

P1H

P1H

G1/8-G1/4

Technical Data

Fluid: Compressed air

Maximum pressure:
Transparent bowl: 10 bar (150 psig)
Metal bowl: 17 bar (250 psig)

Operating temperature:*
Transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +65°C (0° to +150°F)
* Air supply must be dry enough to avoid ice formation at temperatures below +35°F (+2°C)
Typical flow at 7 bar (100 psig) inlet pressure, 6,3 bar
(90 psig) set pressure and a droop of 1 bar (15 psig) from set:
1/8" ports: T.B.A.
1/4" ports: 3 dm3/s (6 scfm)
Drain connection: 1/8" pipe

Filter/Regulator

Partical removal: 5 μm or 40 μm. Within ISO 8573-1, Class 3 and Class 5

Recommended regulating pressure ranges†:
0,3 to 7 bar (5 to 100 psig) standard
0,3 to 3,5 bar (5 to 50 psig) optional
† Outlet pressures can be adjusted to pressures in excess of, and less than those
specified. Do not use these units to control pressures outside of the specified
ranges.

Gauge ports:
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports

Automatic drain operation: Spitter type drain operates momentarily when a rapid change in air flow occurs or when the supply pressure is reduced.

Lubricator

Start point (i.e., minimum flow required for lubricator operation):
0,24 dm3/s (0.5 scfm) at 6,3 bar (90 psig) inlet pressure

Nominal bowl capacity: 31 ml (1 fluid ounce)

Recommended lubricants: See page N/AL.8.990.935

Materials:
Polycarbonate bowl standard, zinc bowl
optional. Zinc body. Nitrile elastomeric materials.

Filter/Regulator: Acetal bonnet. Sintered
polypropylene element. Brass/Nitrile valve.
Lubricator: Transparent nylon sight dome.